Filter

Rotary Tool Holders & Accessories

Hydraulic Tool Holders & Chucks

Milling Chucks

Retention Knobs

Shrink Fit Tool Holders & Adapters

Taper Shank Adapters

Showing 25 items

content loaded
TECHNIKS 154100 Hydraulic Holder, 2.244 in Shank Dia, M16 x 1, 1 in Hole Dia
TECHNIKS INDUSTRIES
TECHNIKS 154100 Hydraulic Holder, 2.244 in Shank Dia, M16 x 1, 1 in Hole Dia

Part #

TEK154100

MFG Part #

154100

Standard Pack

1
TECHNIKS 17801 Retention Knob, M12 Thread, 45 deg Angle, 11 mm Knob Dia, BT30 Taper, 43 mm Overall Length, No Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 17801 Retention Knob, M12 Thread, 45 deg Angle, 11 mm Knob Dia, BT30 Taper, 43 mm Overall Length, No Through Coolant (Yes/No)

Part #

TEK17801

MFG Part #

17801

Standard Pack

1
TECHNIKS 17824 Retention Knob, M24 Thread, 23 mm Dia Knob, BT50 Taper, 85 mm OAL
TECHNIKS INDUSTRIES
TECHNIKS 17824 Retention Knob, M24 Thread, 23 mm Dia Knob, BT50 Taper, 85 mm OAL

Part #

TEK17824

MFG Part #

17824
TECHNIKS 21003-45 Retention Knob, 5/8-11 Thread, 45 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, No Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21003-45 Retention Knob, 5/8-11 Thread, 45 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, No Through Coolant (Yes/No)

Part #

TEK21003-45

MFG Part #

21003-45

Standard Pack

1
TECHNIKS 21003-90 Retention Knob, 5/8-11 Thread, 90 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, No Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21003-90 Retention Knob, 5/8-11 Thread, 90 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, No Through Coolant (Yes/No)

Part #

TEK21003-90

MFG Part #

21003-90

Standard Pack

1
TECHNIKS 21003-90C Retention Knob, 5/8-11 Thread, 90 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21003-90C Retention Knob, 5/8-11 Thread, 90 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, Yes Through Coolant (Yes/No)

Part #

TEK21003-90C

MFG Part #

21003-90C

Standard Pack

1
TECHNIKS 21003-C Retention Knob, 5/8-11 Thread, 45 deg Angle, 0.74 in Knob Dia, CAT40 Taper, 1-1/2 in Overall Length, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21003-C Retention Knob, 5/8-11 Thread, 45 deg Angle, 0.74 in Knob Dia, CAT40 Taper, 1-1/2 in Overall Length, Yes Through Coolant (Yes/No)

Part #

TEK21003-C

MFG Part #

21003-C

Standard Pack

1
TECHNIKS 21005-45C Retention Knob, 1-8 Thread, 45 deg Angle, 0.906 in Knob Dia, CAT50 Taper, 3-11/32 in Overall Length, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21005-45C Retention Knob, 1-8 Thread, 45 deg Angle, 0.906 in Knob Dia, CAT50 Taper, 3-11/32 in Overall Length, Yes Through Coolant (Yes/No)

Part #

TEK21005-45C

MFG Part #

21005-45C

Standard Pack

1
TECHNIKS 21005-60 Retention Knob, 1-8 Thread, 0.906 in Dia Knob, CAT50 Taper, 3.346 in OAL
TECHNIKS INDUSTRIES
TECHNIKS 21005-60 Retention Knob, 1-8 Thread, 0.906 in Dia Knob, CAT50 Taper, 3.346 in OAL

Part #

STIP29-01-21005-60

MFG Part #

21005-60
TECHNIKS 21005-60C Retention Knob, 1-8 Thread, 60 deg Angle, 0.906 in Knob Dia, CAT50 Taper, 3-11/32 in Overall Length, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21005-60C Retention Knob, 1-8 Thread, 60 deg Angle, 0.906 in Knob Dia, CAT50 Taper, 3-11/32 in Overall Length, Yes Through Coolant (Yes/No)

Part #

TEK21005-60C

MFG Part #

21005-60C

Standard Pack

1
TECHNIKS 21005-C Retention Knob, 1-8 Thread, 1.14 in Dia Knob, CAT50 Taper, 2.3 in OAL
TECHNIKS INDUSTRIES
TECHNIKS 21005-C Retention Knob, 1-8 Thread, 1.14 in Dia Knob, CAT50 Taper, 2.3 in OAL

Part #

STIP29-01-21005C

MFG Part #

21005-C
TECHNIKS 22625 Precision Taper Tool Holder, #3 MT Dia Adapter/Shank, Tapered Shank, CAT50 Modular Connection, #3 MT Taper, 2.56 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22625 Precision Taper Tool Holder, #3 MT Dia Adapter/Shank, Tapered Shank, CAT50 Modular Connection, #3 MT Taper, 2.56 in Projection

Part #

STIP45-03-22625

MFG Part #

22625
TECHNIKS 23210G CAT Milling Chuck, CAT40 Taper, 1-1/4 in Hole Dia, 1-1/4 in Nose Dia, 2.38 in Projection, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 23210G CAT Milling Chuck, CAT40 Taper, 1-1/4 in Hole Dia, 1-1/4 in Nose Dia, 2.38 in Projection, Yes Through Coolant (Yes/No)

Part #

23210G

MFG Part #

23210G
TECHNIKS 255125 Hydraulic Chuck, 1-1/4 in Shank Dia, Taper Shank, M8x1, 1-1/4 in Hole Dia, 2.84 in Nose Dia, 3.19 in Projection, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 255125 Hydraulic Chuck, 1-1/4 in Shank Dia, Taper Shank, M8x1, 1-1/4 in Hole Dia, 2.84 in Nose Dia, 3.19 in Projection, Yes Through Coolant (Yes/No)

Part #

STIP29-03-255125

MFG Part #

255125
TECHNIKS 29068 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT50, 1 in Shank Dia, For Use With: High-speed Milling Machines, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 29068 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT50, 1 in Shank Dia, For Use With: High-speed Milling Machines, Yes Through Coolant (Yes/No)

Part #

STIP29-03-29068

MFG Part #

29068
TECHNIKS 32.780.12.295 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT50, For Use With: Sfs12 Modular Shrink Fit System, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 32.780.12.295 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT50, For Use With: Sfs12 Modular Shrink Fit System, Yes Through Coolant (Yes/No)

Part #

STIP29-03-3278012295

MFG Part #

32.780.12.295
TECHNIKS 33256G Milling Chuck With CoolBLAST Coolant Through Channel, HSK100A Taper, 1-1/4 in Dia Hole, 2.79 in Dia Nose, 4.72 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 33256G Milling Chuck With CoolBLAST Coolant Through Channel, HSK100A Taper, 1-1/4 in Dia Hole, 2.79 in Dia Nose, 4.72 in Projection

Part #

TEC33256G

MFG Part #

33256G
TECHNIKS 46.651.58.315B Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/2 in Shank Dia, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 46.651.58.315B Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/2 in Shank Dia, Yes Through Coolant (Yes/No)

Part #

STIP29-03-466158315B

MFG Part #

46.651.58.315B
TECHNIKS 46.651.58.375B Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/2 in Shank Dia, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 46.651.58.375B Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/2 in Shank Dia, Yes Through Coolant (Yes/No)

Part #

TEK4665158375B

MFG Part #

46.651.58.375B
TECHNIKS 47.122.40.800 DualDRIVE Shrink Fit Toolholder, Tapered Shank, SCAT50 Machine Side, For Use With Dual Contact Spindles
TECHNIKS INDUSTRIES
TECHNIKS 47.122.40.800 DualDRIVE Shrink Fit Toolholder, Tapered Shank, SCAT50 Machine Side, For Use With Dual Contact Spindles

Part #

TEC47.122.40.800

MFG Part #

47.122.40.800
TECHNIKS 854030 Extended Hydraulic Holder, Tapered Shank, CAT40, 3/8 in Hole Dia, 0.945 in Nose Dia, 5.906 in Projection, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 854030 Extended Hydraulic Holder, Tapered Shank, CAT40, 3/8 in Hole Dia, 0.945 in Nose Dia, 5.906 in Projection, Yes Through Coolant (Yes/No)

Part #

TEK854030

MFG Part #

854030
TECHNIKS 854032 Hydraulic Holder, 1/2 in Shank Dia, Taper Shank, M10x1, 1/2 in Hole Dia, 1.024 in Nose Dia, 4.724 in Projection, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 854032 Hydraulic Holder, 1/2 in Shank Dia, Taper Shank, M10x1, 1/2 in Hole Dia, 1.024 in Nose Dia, 4.724 in Projection, Yes Through Coolant (Yes/No)

Part #

TEK854032

MFG Part #

854032
TECHNIKS 854036 Hydraulic Holder, 5/8 in Shank Dia, Taper Shank, M12x1, 5/8 in Hole Dia, 1.26 in Nose Dia, 4.724 in Projection, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 854036 Hydraulic Holder, 5/8 in Shank Dia, Taper Shank, M12x1, 5/8 in Hole Dia, 1.26 in Nose Dia, 4.724 in Projection, Yes Through Coolant (Yes/No)

Part #

KYO854036

MFG Part #

854036
TECHNIKS C40-25SF315-9 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/4 in Shank Dia, No Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS C40-25SF315-9 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/4 in Shank Dia, No Through Coolant (Yes/No)

Part #

STIP29-03-31521

MFG Part #

C40-25SF315-9
TECHNIKS TEC21003 Retention Knob, 5/8-11 in, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS TEC21003 Retention Knob, 5/8-11 in, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, Yes Through Coolant (Yes/No)

Part #

/TEC21003

MFG Part #

TEC21003
TECHNIKS 154100 Hydraulic Holder, 2.244 in Shank Dia, M16 x 1, 1 in Hole Dia
TECHNIKS INDUSTRIES
TECHNIKS 154100 Hydraulic Holder, 2.244 in Shank Dia, M16 x 1, 1 in Hole Dia

Part #

TEK154100

MFG Part #

154100

Standard Pack

1
TECHNIKS 17801 Retention Knob, M12 Thread, 45 deg Angle, 11 mm Knob Dia, BT30 Taper, 43 mm Overall Length, No Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 17801 Retention Knob, M12 Thread, 45 deg Angle, 11 mm Knob Dia, BT30 Taper, 43 mm Overall Length, No Through Coolant (Yes/No)

Part #

TEK17801

MFG Part #

17801

Standard Pack

1
TECHNIKS 17824 Retention Knob, M24 Thread, 23 mm Dia Knob, BT50 Taper, 85 mm OAL
TECHNIKS INDUSTRIES
TECHNIKS 17824 Retention Knob, M24 Thread, 23 mm Dia Knob, BT50 Taper, 85 mm OAL

Part #

TEK17824

MFG Part #

17824
TECHNIKS 21003-45 Retention Knob, 5/8-11 Thread, 45 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, No Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21003-45 Retention Knob, 5/8-11 Thread, 45 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, No Through Coolant (Yes/No)

Part #

TEK21003-45

MFG Part #

21003-45

Standard Pack

1
TECHNIKS 21003-90 Retention Knob, 5/8-11 Thread, 90 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, No Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21003-90 Retention Knob, 5/8-11 Thread, 90 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, No Through Coolant (Yes/No)

Part #

TEK21003-90

MFG Part #

21003-90

Standard Pack

1
TECHNIKS 21003-90C Retention Knob, 5/8-11 Thread, 90 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21003-90C Retention Knob, 5/8-11 Thread, 90 deg Angle, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, Yes Through Coolant (Yes/No)

Part #

TEK21003-90C

MFG Part #

21003-90C

Standard Pack

1
TECHNIKS 21003-C Retention Knob, 5/8-11 Thread, 45 deg Angle, 0.74 in Knob Dia, CAT40 Taper, 1-1/2 in Overall Length, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21003-C Retention Knob, 5/8-11 Thread, 45 deg Angle, 0.74 in Knob Dia, CAT40 Taper, 1-1/2 in Overall Length, Yes Through Coolant (Yes/No)

Part #

TEK21003-C

MFG Part #

21003-C

Standard Pack

1
TECHNIKS 21005-45C Retention Knob, 1-8 Thread, 45 deg Angle, 0.906 in Knob Dia, CAT50 Taper, 3-11/32 in Overall Length, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21005-45C Retention Knob, 1-8 Thread, 45 deg Angle, 0.906 in Knob Dia, CAT50 Taper, 3-11/32 in Overall Length, Yes Through Coolant (Yes/No)

Part #

TEK21005-45C

MFG Part #

21005-45C

Standard Pack

1
TECHNIKS 21005-60 Retention Knob, 1-8 Thread, 0.906 in Dia Knob, CAT50 Taper, 3.346 in OAL
TECHNIKS INDUSTRIES
TECHNIKS 21005-60 Retention Knob, 1-8 Thread, 0.906 in Dia Knob, CAT50 Taper, 3.346 in OAL

Part #

STIP29-01-21005-60

MFG Part #

21005-60
TECHNIKS 21005-60C Retention Knob, 1-8 Thread, 60 deg Angle, 0.906 in Knob Dia, CAT50 Taper, 3-11/32 in Overall Length, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 21005-60C Retention Knob, 1-8 Thread, 60 deg Angle, 0.906 in Knob Dia, CAT50 Taper, 3-11/32 in Overall Length, Yes Through Coolant (Yes/No)

Part #

TEK21005-60C

MFG Part #

21005-60C

Standard Pack

1
TECHNIKS 21005-C Retention Knob, 1-8 Thread, 1.14 in Dia Knob, CAT50 Taper, 2.3 in OAL
TECHNIKS INDUSTRIES
TECHNIKS 21005-C Retention Knob, 1-8 Thread, 1.14 in Dia Knob, CAT50 Taper, 2.3 in OAL

Part #

STIP29-01-21005C

MFG Part #

21005-C
TECHNIKS 22625 Precision Taper Tool Holder, #3 MT Dia Adapter/Shank, Tapered Shank, CAT50 Modular Connection, #3 MT Taper, 2.56 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 22625 Precision Taper Tool Holder, #3 MT Dia Adapter/Shank, Tapered Shank, CAT50 Modular Connection, #3 MT Taper, 2.56 in Projection

Part #

STIP45-03-22625

MFG Part #

22625
TECHNIKS 23210G CAT Milling Chuck, CAT40 Taper, 1-1/4 in Hole Dia, 1-1/4 in Nose Dia, 2.38 in Projection, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 23210G CAT Milling Chuck, CAT40 Taper, 1-1/4 in Hole Dia, 1-1/4 in Nose Dia, 2.38 in Projection, Yes Through Coolant (Yes/No)

Part #

23210G

MFG Part #

23210G
TECHNIKS 255125 Hydraulic Chuck, 1-1/4 in Shank Dia, Taper Shank, M8x1, 1-1/4 in Hole Dia, 2.84 in Nose Dia, 3.19 in Projection, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 255125 Hydraulic Chuck, 1-1/4 in Shank Dia, Taper Shank, M8x1, 1-1/4 in Hole Dia, 2.84 in Nose Dia, 3.19 in Projection, Yes Through Coolant (Yes/No)

Part #

STIP29-03-255125

MFG Part #

255125
TECHNIKS 29068 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT50, 1 in Shank Dia, For Use With: High-speed Milling Machines, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 29068 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT50, 1 in Shank Dia, For Use With: High-speed Milling Machines, Yes Through Coolant (Yes/No)

Part #

STIP29-03-29068

MFG Part #

29068
TECHNIKS 32.780.12.295 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT50, For Use With: Sfs12 Modular Shrink Fit System, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 32.780.12.295 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT50, For Use With: Sfs12 Modular Shrink Fit System, Yes Through Coolant (Yes/No)

Part #

STIP29-03-3278012295

MFG Part #

32.780.12.295
TECHNIKS 33256G Milling Chuck With CoolBLAST Coolant Through Channel, HSK100A Taper, 1-1/4 in Dia Hole, 2.79 in Dia Nose, 4.72 in Projection
TECHNIKS INDUSTRIES
TECHNIKS 33256G Milling Chuck With CoolBLAST Coolant Through Channel, HSK100A Taper, 1-1/4 in Dia Hole, 2.79 in Dia Nose, 4.72 in Projection

Part #

TEC33256G

MFG Part #

33256G
TECHNIKS 46.651.58.315B Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/2 in Shank Dia, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 46.651.58.315B Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/2 in Shank Dia, Yes Through Coolant (Yes/No)

Part #

STIP29-03-466158315B

MFG Part #

46.651.58.315B
TECHNIKS 46.651.58.375B Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/2 in Shank Dia, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 46.651.58.375B Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/2 in Shank Dia, Yes Through Coolant (Yes/No)

Part #

TEK4665158375B

MFG Part #

46.651.58.375B
TECHNIKS 47.122.40.800 DualDRIVE Shrink Fit Toolholder, Tapered Shank, SCAT50 Machine Side, For Use With Dual Contact Spindles
TECHNIKS INDUSTRIES
TECHNIKS 47.122.40.800 DualDRIVE Shrink Fit Toolholder, Tapered Shank, SCAT50 Machine Side, For Use With Dual Contact Spindles

Part #

TEC47.122.40.800

MFG Part #

47.122.40.800
TECHNIKS 854030 Extended Hydraulic Holder, Tapered Shank, CAT40, 3/8 in Hole Dia, 0.945 in Nose Dia, 5.906 in Projection, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 854030 Extended Hydraulic Holder, Tapered Shank, CAT40, 3/8 in Hole Dia, 0.945 in Nose Dia, 5.906 in Projection, Yes Through Coolant (Yes/No)

Part #

TEK854030

MFG Part #

854030
TECHNIKS 854032 Hydraulic Holder, 1/2 in Shank Dia, Taper Shank, M10x1, 1/2 in Hole Dia, 1.024 in Nose Dia, 4.724 in Projection, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 854032 Hydraulic Holder, 1/2 in Shank Dia, Taper Shank, M10x1, 1/2 in Hole Dia, 1.024 in Nose Dia, 4.724 in Projection, Yes Through Coolant (Yes/No)

Part #

TEK854032

MFG Part #

854032
TECHNIKS 854036 Hydraulic Holder, 5/8 in Shank Dia, Taper Shank, M12x1, 5/8 in Hole Dia, 1.26 in Nose Dia, 4.724 in Projection, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS 854036 Hydraulic Holder, 5/8 in Shank Dia, Taper Shank, M12x1, 5/8 in Hole Dia, 1.26 in Nose Dia, 4.724 in Projection, Yes Through Coolant (Yes/No)

Part #

KYO854036

MFG Part #

854036
TECHNIKS C40-25SF315-9 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/4 in Shank Dia, No Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS C40-25SF315-9 Shrink-Fit Tool Holder, Taper Shank, System Size Machine Side: CAT40, 1/4 in Shank Dia, No Through Coolant (Yes/No)

Part #

STIP29-03-31521

MFG Part #

C40-25SF315-9
TECHNIKS TEC21003 Retention Knob, 5/8-11 in, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, Yes Through Coolant (Yes/No)
TECHNIKS INDUSTRIES
TECHNIKS TEC21003 Retention Knob, 5/8-11 in, 0.59 in Knob Dia, CAT40 Taper, 2-1/4 in Overall Length, Yes Through Coolant (Yes/No)

Part #

/TEC21003

MFG Part #

TEC21003